Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For

Front-Control-Arms-And-Tie-Rods-Link-Sway-Bar-Upper-Ball-Joints-Kit-13Pc-For-01-lx
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For

Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For
Front Lower Control Arms Assembly And Tie Rods Link Sway Bar Upper Ball Joints Suspension Kit. This product only fits the following vehicles. GMC Sierra 1500 Classic RWD and with Torsion Bar front springs and Rack steering type AND Without Frame Bracket. Your vehicle is not listed? Search in our store by entering your vehicle year make model and the position you are searching for in the form below. 1 x Front Left Lower Suspension Control Arm and Ball Joint Assembly (Driver Side). 1 x Front Right Lower Suspension Control Arm and Ball Joint Assembly (Passenger Side). 2 x Front Upper Suspension Ball Joint (Both Sides). 2 x Front Suspension Stabilizer Bar Link Kit (Both Sides). 2 x Front Outer Steering Tie Rod End (Both Sides). 2 x Front Inner Steering Tie Rod End (Both Sides). 1 x Front Steering Pitman Arm. 1 x Front Steering Idler Arm Bracket Assembly. 1 x Front Steering Idler Arm. TOR Suspension Control Arm and Ball Joint Assembly. TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) – No additional parts or tools required for installation. TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering. Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm. Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency. Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances. Convenient easy access wrench flat allows for the use of a socket for easy installation and removal. Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength. TOR Suspension Ball Joint. TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability. Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint. TOR engineered steel composition (40cr+) results in a stronger component. An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit. Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life. Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances. TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear. TOR Suspension Stabilizer Bar Link Kit. Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit. TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Socket design with self-adjusting internal tension spring and high-strength polymer bearing. TOR Steering Tie Rod End. Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod. TOR Steering Pitman Arm. Includes a TOR exclusive anti-drainback design to control lubrication flow and prevent dry start up. Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life. Needle bearings and snap rings are sourced from an original equipment supplier. Needle bearings provide size consistency and proper hardness for even load distribution. Snap rings are held to strict tolerances to ensure proper cup position and retention. Nitrile rubber grease seals use a compressed double lip design to ensure more effective protection from contaminants and are purgable for longer life. Seals utilize stringent multifaceted SAE performance standards to ensure consistently high quality. TOR Steering Idler Arm Bracket Assembly. TOR Steering Idler Arm. To obtain this guarantee. If you wish further validation, simply copy and paste your vehicle information along with your VIN into the order note. We will double-check it before sending your order. We assume all responsibility for the fitment information of our products. We follow the guidelines set out by Friction Material Standards Institute (FMSI) to ensure the safety of our customers. This means that if the FMSI says a pad number should have no slot or should not be chamfered based on it’s size, we will follow their guidelines. Our customer’s safety is our highest priority. All our products follow the OE specifications: there is no modification needed for installation. Do you need any additional information about my vehicle? If you see your vehicle in the fitment list, you don’t need to send us additional information, the parts will fit your vehicle, we guarantee it. If you are not sure and would like to double check, send us a message with your vehicle information or VIN and our vehicle specialists will assist you. The picture does not match my parts. The picture in our listing are the actual image of the specified application, unless specified to be a generic image. This item is in the category “Automotive\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Control Arms, Ball Joints & Assemblies”. The seller is “transitautodotca” and is located in this country: CA. This item can be shipped to Canada.
  • Manufacturer Part Number: KTR-104065
  • Fitment Type: Direct Replacement
  • Manufacturer Warranty: Lifetime
  • Interchange Part Number: Driver Passenger Both Sides Kit With And & n Full, Set
  • Other Part Number: K620381, 520-127, CB90063, MS20342, GS20342, CMS20342, CK620381
  • Superseded Part Number: K620381, 520-127, CB90063, MS20342, GS20342, CMS20342, CK620381
  • Brand: TOR
  • UPC: 775629850946

Front Control Arms And Tie Rods Link Sway Bar Upper Ball Joints Kit (13Pc) For

Comments are closed.

BizStudio by Sketch Themes